1
-228x228.JPG "Attachment number four")
0
in stock
Nozzle to the burner GP-1
Surround the flame has no stinger. Suitable for use in the home.
Very popular with fishermen and hunters...
600.00р.
Ends
11
in stock
DescriptionThe torch is designed for soldering, brazing and melting of non-ferrous metals.Fuel type: LP gas mixtures, compressed air is also required. Working pressure from 0.5 to 1.5 bar.The torch is bundled with three tips (12, 16, 22 mm).Flame tem..
10 700.00р.
Ends
4
in stock
Description
Burner GK-1 is designed to perform brazing, welding and melting of metals.
In this model, the gas and oxygen are served under the same pressure (0.4 to 1.0 kgf/cm sq). The presence of interchangeable tips allows you to use the same bu..
11 000.00р.
Sold
0
Pre-Order
A solution for feeding your GP LPG torch by CP 250 camping butane canister. It can be useful as a reserve fuel source or during a trip.
Please note that it's intended for GP torches with Shell or Universal gas connection type.
Melting of silver, go..
800.00р.
Bestseller
Sold
6
Pre-Order
Designed for melting silver and other metals, made of steel.Most powerful tip for our GP-3 LP Gas Torch.The tip has an adjustment ring for air amount control...
900.00р.
Sold
0
Pre-Order
Hose Semperit ( Austria) Resistance to rupture :3 :1 Reinforcement: synthetic yarn Gatestone, designed for a pressure of 20 bar. Brass nut-left-hand thread, connection Assembly to the burner. It is applicable for connection to the cylinder. Suitable ..
1 700.00р.
Bestseller
Sold
0
Pre-Order
#209 FluxApply flux on surface as a paste mixing it with water at a ratio of 1: 1 by weight
Applications: Ni alloy, Cu alloy, Ag alloy,
steell, stainless stieel.Ingridients: B - 12,3-13,3%, F - 26,7-28,5%, K - 33,5-by 36.4%, O - 21,8-27,5%..
200.00р.
Sold
6
Sold
6
Pre-Order
Fuel type: butane based LP gas mixtures. Package contents:The torch is bundled with two tips (9 and 16 mm), additional tip is available for purchase.Hose length is 1.5 meters.
Dimensions of the torch:Length: 150 mmWidth: 80 mmHeight..
7 500.00р.
Sold
-228x228.jpg "GP-1m LP Gas Torch")
8
Pre-Order
Description:Ideal for jewelry soldering, heating, annealing and also melting of moderate amounts of copper, silver and gold alloys (using additional tip).Specifications:Fuel type: propane based LP gas mixtures. Package contents:The torch is bundled w..
10 500.00р.
Sold
3
Pre-Order
Description:Ideal for jewelry soldering, heating, annealing and also melting of moderate amounts of copper, silver and gold alloys (using additional tip).Specifications:Fuel type: propane based LP gas mixtures. Package contents:The torch is bundled w..
10 000.00р.
Bestseller
Sold
25
Pre-Order
Description
- Designed for soft soldering and hard solder, melting small amounts of metal (up to 50 G.)
- Heating and annealing with the use of a combustible gas.
- The selection of appropriate nozzles allows you to select the desired type o..
10 200.00р.
Bestseller
Sold
47
Pre-Order
Description:Ideal for jewelry soldering, heating, annealing and also melting of moderate amounts of copper, silver and gold alloys (using additional tip).Specifications:Fuel type: propane based LP gas mixtures. Package contents:The torch is bundled w..
10 700.00р.
LP gas torches GP series
WE 3645-02
certificate № ROSS RU.A.V
The temperature of combustion of propane with air is about 1400 °C., Manufactured by us, burner types the GP series does not require additional air supply. The air entrained by the gas stream. Burner connected to the gas cylinder directly without a gearbox.
LP gas+oxygen torch GK
Designed for soft soldering and hard alloys, melting, preheating and annealing. Works on any gas-oxygen mixtures. The combustion temperature is about 1900 °C. Adjusting valves and the selection of appropriate nozzles allows you to set the desired type of flame.
The warranty on all gas burners one year.
The service life of not less than ten years.